Transfer CFT messages: CFTU, CFTW, CFTX

This topic lists the CFTUxx, CFTWxx, and CFTXxx (CFT xnnx) messages and provides the type, a description, consequence, and corrective actions when applicable.

Message format

Earlier versions of Transfer CFT used a different message format than the current version 3.1.3. The error messages displayed in this document use the former, or earlier version, format. If your system uses the CFTLOG parameter Format = V24, the log display is as shown below:

CFTXXX: fixed text message <variables>

Example

CFTLOG FORMAT=[V23,V24]

For V23: CFTT57I PART=&part IDF=&idf IDT=&idt &str transfer started

For V24: CFTT57I &str transfer started <IDTU=&idtu PART=&part IDF=&idf IDT=&idt>

Error

CFTU00I: &Cmd _ Correct (&str)

Explanation

The &Cmd command is executed correctly. The &str string represents the parameters passed with this command (up to 50 characters).

 

Error

CFTU01E: storage allocation error

Explanation

The communication utility could not acquire the memory required to run.

Consequence

Immediate shutdown of the communication utility.

Action

Inform Product Support.

 

Error

CFTU02E: unable to allocate file &Fname

Explanation

Problem allocating the file containing the parameter setting commands.

Consequence

Immediate shutdown of the communication utility.

Action

Check the existence and state of the file, correct the error and then restart the communication utility.

 

Error

CFTU03E: unable to open file &Fname

Explanation

Problem opening the file containing the parameter setting commands.

Consequence

Immediate shutdown of the communication utility.

Action

Check the characteristics of the file to be opened and inform Product Support if necessary.

 

Error

CFTU04E: error reading input file &Fname

Explanation

Problem reading the file containing the parameter setting commands.

Consequence

Immediate shutdown of the communication utility.

Action

Check the characteristics of the file to be opened and inform Product Support if necessary.

 

Error

CFTU05E: &Cmd Failed _ Unexpected end of file (command)

Explanation

The end of the file was reached before the end of the command (the last character of the command line may be a comma).

Consequence

Immediate shutdown of the communication utility.

Action

Review the command syntax, correct the error and then restart the communication utility.

 

Error

CFTU06E: unexpected end of file before new command

Explanation

The end of the file was reached before the start of a new command (a comment in the file read may not be closed).

Consequence

Immediate shutdown of the communication utility.

Action

Add an end of comment marker (*/) to the file and then restart the communication utility.

 

Error

CFTU07E: &Cmd Failed _ unexpected end of file (comments)

Explanation

The end of the file was reached before the end of the command (a comment inside the command may not be closed).

Consequence

Immediate shutdown of the communication utility.

Action

Add an end of comment marker (*/) in the command and then restart the communication utility.

 

Error

CFTU08E: &Cmd Failed _ missing parenthesis

Explanation

An opening or closing parenthesis is missing in the command syntax.

Consequence

Immediate shutdown of the communication utility.

Action

Review the command syntax, correct the error and then restart the communication utility.

 

Error

CFTU09E: &Cmd Failed _ command size too large

Explanation

The length of the command name is greater than 8.

Consequence

Immediate shutdown of the communication utility.

Action

Check the command syntax, correct the error and then restart the communication utility.

 

Error

CFTU10E: &Cmd Failed _ unknown command

Explanation

The command is unknown.

Consequence

Immediate shutdown of the communication utility.

Action

Check the command in the Command summary; correct the error and then restart the communication utility.

 

Error

CFTU11E: &Cmd Failed _ keyword &Keyw too large

Explanation

The length of the &Keyw keyword is greater than 8.

Consequence

Immediate shutdown of the communication utility.

Action

Check the description of this parameter in the Transfer CFT Online documentation, correct the error and then restart the communication utility.

 

Error

CFTU12E: &Cmd Failed _ illegal separator for keyword &Keyw

Explanation

A parameter separator in the &Cmd command is invalid.

Consequence

Immediate shutdown of the communication utility.

Action

Check the command syntax - the separator must be a comma. Correct the error and then restart the communication utility.

 

Error

CFTU13E: &Cmd Failed_missing quote

Explanation

A closing quote (') is missing in the value assigned to a command parameter.

Consequence

Immediate shutdown of the communication utility.

Action

Check the offending parameter, correct the error and then restart the communication utility.

 

Error

CFTU14E: &Cmd Failed _ too many keywords

Explanation

There are too many keywords for this command.

Consequence

Immediate shutdown of the communication utility.

Action

Check the command syntax, correct the error, and then restart the communication utility.

 

Error

CFTU15E: &Cmd Failed _ keyword &Keyw unknown or duplicate

Explanation

The &Keyw keyword is unknown or appears twice in the command.

Consequence

Immediate shutdown of the communication utility.

Action

Check the command syntax, correct the error and then restart the communication utility.

 

Error

CFTU16E: &Cmd Failed _ keyword &Keyw missing

Explanation

The &Keyw keyword, which is mandatory for the command, is missing.

Consequence

Immediate shutdown of the communication utility.

Action

Check the command syntax, correct the error and then restart the communication utility.

 

Error

CFTU17E: &Cmd Failed _ keyword &Keyw value out of bounds

Explanation

The &Keyw keyword of the &Cmd command is numeric and its value has exceeded the authorized limits.

Consequence

Immediate shutdown of the communication utility.

Action

Check the possible values for this parameter, correct the error and then restart the communication utility.

 

Error

CFTU18E:&Cmd Failed _ invalid value for keyword &Keyw

Explanation

The value of the &Keyw keyword of the &Cmd command is not authorized (numeric value for an alphabetic parameter for example).

Consequence

Immediate shutdown of the communication utility.

Action

Check the possible values for this parameter, correct the error and then restart the communication utility.

 

Error

CFTU19E:CFTDEST Failed _ keywords FNAME and &str are mutually exclusive

Explanation

The components of a broadcast list can either be described within the command

PART = parameter or in an external file FNAME = parameter

These two parameters are mutually exclusive.

If &str=IDF

The IDENTIFIERS authorized in the CFTAUTH command can either be described within the command (IDF = parameter) or in an external file (FNAME = parameter).

These two parameters are mutually exclusive.

 

Error

CFTU20E:&str

Explanation

CFTUTIL command interpreter information messages.

The &str is self-explanatory and can be of several types:

  • Execution header:

Information messages indicating the product, release, copyright and execution start date and time

  • Execution report:

Information messages indicating the number of commands interpreted, the number of errors detected and the execution end date and time

  • Dynamic modification of a Transfer CFT partner state:

Part = &part : &str1

  • The ACT or INACT command has been executed correctly (&str1 indicates the change of state for the &part partner: initial state -> final state). There are four possible states for a partner:
  • ACTIVEBOTH: Partner active in both modes (requester and server)
  • NOACTIVE: Partner inactive in both modes
  • ACTIVEREQ: Partner active in the requester mode
  • ACTIVESERV: Partner active in the server mode

 

Warning

CFTW01W: PART=&part IDF=&idf IDT=&idt Temporary file &file deleted

Explanation

The &file temporary file was deleted at the end of the transfer. The name of this file is declared in the WFNAME parameter of the CFTSEND and CFTRECV commands.

 

Warning

CFTW02W: CFTSEND &idsend override SEND parameters

Explanation

The parameters of the SEND command are overridden by the parameters in the associated CFTSEND command.

 

Warning

CFTW03W: _ Send command: Unauthorized usage of IDF = &idf

Explanation

The &idf IDF is not authorized for the SEND command. Check your software key restrictions.

 

Warning

CFTW04W: _ Recv command: Unauthorized usage on IDF = &idf

Explanation

The &idf IDF is not authorized for the RECV command. See the restrictions concerning the value of your software key.

 

Warning

CFTW05W: PART=&part IDF = &idf Temporary file unknown, WFNAME not defined in SEND

Explanation

The WFNAME was not set in the CFTSEND command when preparing a transfer requiring additional processing and sending a group of files.

Action

Modify the parameter settings using a different IDF for this type of transfer.

 

Warning

CFTW07W: PART=&part IDF = &idf _ SELFNAME not authorized for COPY

Explanation

You cannot use a selection file when implementing additional processing prior to a transfer (IEBCOPY with MVS for example).

Consequence

The transfer is not triggered.

Action

Do not use a selection file; you can, however, specify a generic file name (FNAME= #FIL1*, FNAME= #TFILM*).

 

Warning

CFTW08W: CFTRECV &idrecv override RECV parameters

Explanation

The RECV command parameters are overridden by the parameters set in the associated CFTRECV command.

 

Warning

CFTW09I: nidf&idf NIDF=&idt CFTSEND &idf IDT=&part IDF=&PART=

CFTW091: PART=&part IDF=&idf IDT=&idt CFTRECV &idf NIDF=&nidf

Explanation

Indicates the ID of the CFTSEND or CFTRECV that was actually used.

Example

CFTW091 PART=SERVER   IDF=TRTR     

IDT=D1918581 CFTRECV IDFDEF   NIDF=TRTR

 

Warning

CFTX01W: Action &action on object &object not authorized for user &user: IDF = &idf

Explanation

The authorization system does not allow the &user user to set the &idf IDF (refer to your security administrator to find out your access rights).

 

Warning

CFTX02W: owner user is &user, owner group is &group

Explanation

The user and group names used are displayed. This message is displayed after the CFTX01W message.

 

Warning

CFTX03W: Action &action on object &object not authorized for user &user

Explanation

The security system does not allow &user to perform the specified action (contact your security administrator to set the required privileges).

 

Warning

CFTX04W: With value &value

Explanation

Warning message.

 

Warning

CFTX05W: Action &action on object &object not authorized for user &user: FNAME=&fname

Explanation

The security system does not allow &user to specify &fname as the FNAME value (contact your security administrator to set the required privileges).

 

Information

 

CFTX10I: Warning message: security file commands were modified

CFTX11I: Without a generation was done.

CFTX12I: Unusual comportment occurs.

Explanation

Modifications have been made to the authorization system, but the system has not been regenerated.

Abnormal behavior may arise when Transfer CFT is executed.

Related Links