Transfer CFT messages: CFTP

This topic lists the CFTPxx (CFT xnnx) messages and provides the type, a description, consequence, and corrective actions when applicable.

Message format

Earlier versions of Transfer CFT used a different message format than the current version 3.1.3. The error messages displayed in this document use the former, or earlier version, format. If your system uses the CFTLOG parameter Format = V24, the log display is as shown below:

CFTXXX: fixed text message <variables>

Example

CFTLOG FORMAT=[V23,V24]

For V23: CFTT57I PART=&part IDF=&idf IDT=&idt &str transfer started

For V24: CFTT57I &str transfer started <IDTU=&idtu PART=&part IDF=&idf IDT=&idt>

Error

CFTP01F: CFTPARM &id _ Not found

Explanation

The &id identifier of the Transfer CFT parameter file (see the CFTPARM parameter) is not defined.

Consequence

The Transfer CFT initialization phase is stopped.

Action

Check the CFTPARM parameter settings (see the CFTPARM parameter), correct and restart Transfer CFT.

 

Error

CFTP02F: CFTTRACE &id for CFTPARM &id _ Not found

Explanation

When initializing Transfer CFT, the CFTTRACE &id identifier was not found in the Transfer CFT parameter file.

Consequence

The Transfer CFT initialization phase is stopped.

Action

Check the CFTSYST parameter settings (see the CFTPARM parameter), correct and restart Transfer CFT.

 

Error

CFTP03F: CFTLOG &id for CFTPARM &id _ Not found

Explanation

During Transfer CFT initialization the CFTLOG &id identifier was not found in the Transfer CFT parameter file.

Consequence

The Transfer CFT initialization phase is stopped.

Action

Check the CFTLOG parameter settings (see the CFTPARM parameter), correct and restart Transfer CFT.

 

Error

CFTP04F: CFTNET &id for CFTPARM &id _ Not found

Explanation

During Transfer CFT initialization the CFTNET &id identifier was not found in the Transfer CFT parameter file.

Consequence

The Transfer CFT initialization phase is stopped.

Action

Check the CFTNET parameter settings (see the CFTPARM parameter), correct and restart Transfer CFT.

 

Error

CFTP05F: CFTPROT &id for CFTPARM &id_ Not found

Explanation

During Transfer CFT initialization the CFTPROT &id identifier was not found in the Transfer CFT parameter file.

Consequence

The Transfer CFT initialization phase is stopped.

Action

Check the CFTPROT parameter settings (see CFTPROT), correct and restart Transfer CFT.

 

Error

CFTP06F: CFTCAT &id for CFTPARM &id _ Not found

Explanation

During Transfer CFT initialization the CFTCAT &id identifier was not found in the Transfer CFT parameter file.

Consequence

The Transfer CFT initialization phase is stopped.

Action

Check the CFTCAT parameter settings (see CFTCAT), correct and restart Transfer CFT.

 

Error

CFTP07F: CFTCOM &id for CFTPARM &id _ Not found

Explanation

During Transfer CFT initialization the CFTCOM &id identifier was not found in the Transfer CFT parameter file.

Consequence

The Transfer CFT initialization phase is stopped.

Action

Check the CFTCOM parameter settings (see CFTCOM), correct and restart Transfer CFT.

CFTP08F: CFTNET &id for CFTPROT &id _ Not found

 

Fatal

CFTP08F: CFTNET &id for CFTPROT &id _ Not found

Explanation

During Transfer CFT initialization the CFTNET &id identifier for a given CFTPROT &id protocol was not found in the Transfer CFT parameter file.

Consequence

The Transfer CFT initialization phase is stopped.

Action

Check:

  • the CFTNET and CFTPROT parameter settings (see the CFT CFTNET and CFTPROT topics)
  • the CFTPARM parameter settings
  • the list of authorized protocols and network identifiers (NET=(.,.), PROT=(.,.) ),that the number of items in this list does not exceed the maximum authorized quota

Correct and restart Transfer CFT.

 

Error

CFTP09F: CFTSEND &id for CFTPARM &id _ No default record found

Explanation

During Transfer CFT initialization the identifier describing the default file characteristics used for send transfers (CFTSEND parameter) is unknown.

Consequence

The Transfer CFT initialization phase cannot continue correctly and Transfer CFT is aborted.

Action

Check the CFTPARM (DEFAULT=.) and CFTSEND parameter settings, correct and restart Transfer CFT.

 

Error

CFTP10F: CFTRECV &id for CFTPARM &id _ No Default record found

Explanation

During Transfer CFT initialization the identifier describing the default file characteristics used for receive transfers (CFTRECV parameter) is unknown.

Consequence

The Transfer CFT initialization phase cannot continue correctly and Transfer CFT is aborted.

Action

Check CFTPARM (DEFAULT=.) and CFTRECV parameter settings, correct and restart Transfer CFT.

 

Error

CFTP13F: CFTXLATE &id _ Not found

Explanation

There is no CFTXLATE command, the identifier of which is &id.

Consequence

The transfer requiring this translation table definition cannot be executed.

Action

Specify a CFTXLATE command for this transfer direction and the source and target alphabets.

 

Error

CFTP14F: CFTACCNT &id for CFTPARM &id _ Not found

Explanation

During Transfer CFT initialization the command describing the accounting characteristics (CFTACCNT command), the ID parameter of which corresponds to the ACCNT parameter in the CFTPARM command, was not found.

Consequence

The Transfer CFT initialization phase cannot continue correctly and Transfer CFT is aborted.

Action

Check the CFTACCNT parameter settings, correct and restart Transfer CFT.

 

Error

CFTP15F: CFTPROT &idprot for CFTPARM &idparm _ Not loading in memory

Explanation

During Transfer CFT initialization the CFTPROT &idprot card could not be loaded in memory (insufficient space).

Consequence

This card cannot be used for transfers.

Action

Reduce the number of CFTPROT card identifiers in the CFTPARM &idparm command (see the Transfer CFT topics that correspond to your OS to find out the parameter setting limits). After correcting your parameter settings, restart Transfer CFT.

 

Error

CFTP16F: CFTNET &idnet for CFTPARM &idparm _ Not loading in memory

Explanation

During Transfer CFT initialization the CFTNET &idnet card could not be loaded in memory (insufficient space).

Consequence

This card cannot be used for transfers.

Action

Reduce the number of CFTNET card identifiers in the CFTPARM &idparm command (see the Transfer CFT topics that correspond to your OS to find out the parameter setting limits).

After correcting your parameter settings, restart Transfer CFT.

 

Error

CFTP17F: CFTCOM &idcom for CFTPARM &idparm _ Not loading in memory

Explanation

During Transfer CFT initialization the CFTCOM &idcom card could not be loaded in memory (insufficient space).

Consequence

This card cannot be used for transfers.

Action

Reduce the number of CFTCOM card identifiers in the CFTPARM &idparm command (see the Transfer CFT topics that correspond to your OS to find out the parameter setting limits).

After correcting your parameter settings, restart Transfer CFT.

 

Error

CFTP18F: Error of integrity

Explanation

An integrity violation has been detected on the parameter or partner file when the file is sealed. The previous message of the CFTIxxx (partner file) or CFTPxxx (parameter file) type gives more information about the operation requested on the file(s).

Consequence

The Transfer CFT initialization phase is aborted. 

 

Error

CFTP19E: PART=&part IDF=&idf CFTAPPL=&id DIRECT=&direct not found

Explanation

The security system is running but the CFTAPPL &id card used to assign an owner to a transfer and corresponding to IDF=&idf was not found.

Consequence

The transfer is rejected and no entry is created in the catalog.

 

Error

CFTP20F: direct=server &id for CFTPROT &prot _ Not found

Explanation

The security (SSL) being activated, the CFTSSL &id direct=server card whose ID parameter corresponds to the value of the SSL parameter, CFTPROT command was not found.

Consequence

The Transfer CFT initialization phase has shut down.

Related Links