Transfer CFT messages: CFTI

This topic lists the CFTIxx (CFT xnnx) messages and provides the type, a description, consequence, and corrective actions when applicable.

Message format

Earlier versions of Transfer CFT used a different message format than the current version 3.1.3. The error messages displayed in this document use the former, or earlier version, format. If your system uses the CFTLOG parameter Format = V24, the log display is as shown below:

CFTXXX: fixed text message <variables>

Example

CFTLOG FORMAT=[V23,V24]

For V23: CFTT57I PART=&part IDF=&idf IDT=&idt &str transfer started

For V24: CFTT57I &str transfer started <IDTU=&idtu PART=&part IDF=&idf IDT=&idt>

Information

CFTI00I: Snumb of spawned procedure is &str

Explanation

Specific MVS: Information concerning the submission of a procedure that has its job identifier specified in &str.

 

Fatal

CFTI01F: &str  

Explanation

Internal Transfer CFT execution error.

The field "&str" can have the following values:

  • CFT error &scs:

Transfer CFT inter-task communication system problem (waiting for the CFTMAIN scheduler task queue)

  • CFT error _ usage expired:

The Transfer CFT user key (CFTPARM KEY) does not authorize Transfer CFT execution beyond the expired period

  • CFT error _ CFT usage not authorized:

The Transfer CFT user key (CFTPARM KEY) does not authorize Transfer CFT execution on this operating system or computer

  • CFT error _ file keys not available:  

The Transfer CFT user keys are stored in an indirection file (CFTPARM KEY parameter); this file cannot be accessed by Transfer CFT

  • CFT error &scs _ Common_area allocation failed:

Definition of the memory area common to the Transfer CFT tasks has failed. This can be caused by insufficient memory

  • CFT error &scs _ Mailbox definition failed:

Transfer CFT is unable to link to a mailbox defined by the *CFTOM command

  • CFT error &scs _ CFT semaphore definition failed:

Transfer CFT is unable to define an inter-task communications queue

  • CFT error _ CFTEXIT ID=&id missing:

A Transfer CFT task dedicated to file EXITs could not be activated (the CFTEXIT command relating to the identifier mentioned (ID) was not found)

  • CFT error _ Maximum process CFTEXIT running reached:

A Transfer CFT task dedicated to file EXITs could not be activated (the maximum number of EXIT processes that can be activated has already been reached)

  • CFT error &cs _ Initializing process CFTEXIT:

A Transfer CFT task dedicated to file EXITs could not be activated (the maximum number of EXIT processes that can be activated has already been reached)

  • CFT error _ &Net Network Access Method Option not authorized by license key:

The Transfer CFT is NOT authorized to use the optional network access method designated by &Net (TCP/IP).

  • CFT error _ SSL Protocol Option not authorized by license key:

A protocol defined in the CFTPARM object uses the SSL option, but the SSL option is not available with this license key.

  • CFT error _ EBICS Protocol Option not authorized by license key:

The EBICS protocol is defined in a CFTPARM object, but the EBICS option is not available with this license key.

  • CFT error _ FIPS Compliance Option not authorized by license key:

The uconf:cft.fips.enable_compliance parameter is set to Yes, but the FIPS option is not available with this license key.

  • CFT error _ File Transfer Acceleration Option not authorized by license key:

The uconf:acceleration.enable parameter is set to Yes, but the acceleration option is not available with this license key.

Consequence

The transfer concerned by the incident is interrupted, which is the K status.

Action

Check parameter settings, analyze the &cs code value to determine, if necessary, the origin of the error:

  • CFT error &scs _ LOG stop failed:

The message logging task cannot be stopped

  • CFT error &scs _ mailbox delete failed:

A mailbox defined by a CFTCOM command cannot be deleted

Consequence

The Transfer CFT initialization phase has stopped.

Action

Analyze the &scs. code to determine the exact origin of the error.

 

Warning

CFTI01W: &str  

Explanation

CFT error &scs _ Initializing process CFTTFIL: A Transfer CFT task dedicated to transfer file access could not be activated.

Consequence Transfer CFT is not stopped, and transfers are not interrupted.

Action

No action necessary.

 

Fatal

CFTI02F: Init Error code &scs _ Allocating param. file &fname

Explanation

During Transfer CFT initialization an error was detected when allocating the Transfer CFT parameter file.

Consequence

The Transfer CFT initialization phase has stopped.

Action

Check that the file is not already allocated; if it exists, correct the error and then restart Transfer CFT.

 

Error

CFTI03F: Init Error code &scs _ Opening param. file &fname

Explanation

During Transfer CFT initialization an error was detected when opening the Transfer CFT parameter file.

Consequence

The Transfer CFT initialization phase has stopped.

Action

Correct the error and then restart Transfer CFT.

 

Error

CFTI04F: Init Error code &scs _ Allocating partners file &fname

Explanation

During Transfer CFT initialization an error was detected when allocating the Transfer CFT partner file.

Consequence

The Transfer CFT initialization phase has stopped.

Action

Check that the file is not already allocated, correct the error and then restart Transfer CFT.

 

Error

CFTI05F: Init Error code &scs _ Opening partners file &fname

Explanation

During Transfer CFT initialization an error was detected when opening the Transfer CFT partner file.

Consequence

The Transfer CFT initialization phase has stopped.

Action

Correct the error and then restart Transfer CFT.

 

Error

CFTI06F: Init Error code &scs _ Allocating catalog file &fname

Explanation

During Transfer CFT initialization an error was detected when allocating the Transfer CFT catalog file.

Consequence

The Transfer CFT initialization phase has stopped.

Action

Check that the file is not already allocated, correct the error and then restart Transfer CFT.

 

Error

CFTI08F: Init error _ Protocol process

Explanation

During Transfer CFT initialization an error was detected when activating the Transfer CFT protocol process.

Consequence

The Transfer CFT initialization phase has stopped.

Action

Inform Transfer CFT Support.

 

Error

CFTI09F: Init error _ Communication process

Explanation

During Transfer CFT initialization an error was detected when activating the Transfer CFT communication process.

Consequence

The Transfer CFT initialization phase has stopped.

Action

Inform Transfer CFT Support.

 

Error

CFTI10F: Init error _ Logger process

Explanation

During Transfer CFT initialization an error was detected when activating the Transfer CFT message logging process.

It may be a memory allocation or queue definition type system error (or a problem when submitting a message to the queue).

Consequence

The Transfer CFT initialization phase has stopped.

Action

Inform Product Support.

 

Information

CFTI11I: Init complete _ Logger process

Explanation

Normal end of Transfer CFT logging process initialization.

 

Information

CFTI12I: Init complete _ Protocol process

Explanation

Normal end of Transfer CFT protocol process initialization.

 

Information

CFTI13I: Init complete _ Communication process

Explanation

Normal end of Transfer CFT communication task initialization.

 

Information 

CFTI14I: CFT Init complete

Explanation

Normal end of Transfer CFT initialization.

 

Error

CFTI15F: Error code &ncs _ Trying to define resource &id

Explanation

Rejection of the define resource request specified by the network interface. The &ncs return code explains the cause of the rejection.

Consequence

The Transfer CFT initialization phase has stopped.

Action

Review Transfer CFT parameter settings (CFTNET commands).

 

Error

CFTI16F: Error code &ncs _ Register request

Explanation

Rejection of the register request request specified by the network interface. The &ncs return code explains the cause of the rejection.

Consequence

The Transfer CFT initialization phase has stopped.

Action

Review Transfer CFT parameter settings (CFTPROT commands).

 

Error

CFTI17F: Init error _ Account file &fname

Explanation

During the Transfer CFT initialization phase an error was detected when processing the accounting file (CFTACCNT command).

Consequence

The Transfer CFT initialization phase has stopped.

Action

Check the existence and integrity of the &fname file.

 

Information 

CFTI18I: _ &str

Explanation

This is a Transfer CFT welcome message describing the computer environment and the main runtime characteristics, according to the options activated by the software key (KEY parameter):

  • Usage of this product is strictly limited to &cpu_id machine: The Transfer CFT can only be executed on the computer with the designated CPU
  • Usage of this product is strictly limited to &label: The Transfer CFT can only be executed within a specific framework, as designated by &label
  • Usage of this product is strictly limited until &date: The Transfer CFT cannot be executed after the date designated by &date
  • &Maxtrans simultaneous transfer(s) is(are) authorized: Transfer CFT cannot process more than &Maxtrans simultaneous transfers. This value overrides the MAXTRANS parameter in the CFTPARM command
  • &Net Network Access Method Option is authorized: The Transfer CFT is authorized to use the optional network access method designated by &Net (TCP/IP)
    • The information in this message is related to the UCONF setting for server.authentication_method.
  • &Prot Protocol Option is authorized: Transfer CFT is authorized to use the protocol option designated by &Prot (Secure PeSIT)

If an attempt is made to use an unauthorized option, such as a network access method or protocol option, Transfer CFT does not start, and displays a message.
Information messages include:

  • FNAME: CFTLOG name
  • AFNAME: CFTALOG name
  • TYPE: File FNAME: file communication name
  • TYPE :Mbx FNAME : mailbox name
  • TYPE :TCPIP HOST: host name PORT: port if synchronous communication

If PassPort is used for SSL:

  • CFTI18I hostname : addrhost
  • CFTI18I port : port number

Consequence

Transfer CFT is stopped during the initialization phase.

 

Information

CFTI19I:© Copyright AXWAY,....

Explanation

Transfer CFT copyright message.

 

Fatal message

CFTI20F: Semaphore definition failure CR=&cr CS= &scs

Explanation

Cannot define the internal communications queue.

Consequence

Transfer CFT is stopped during its initialization phase.

 

Error

CFTI21F: ID=&id Resource define failure CS=&ncs NET=&net

Explanation

Cannot define the resource, the identifier of which appears in the message. This resource corresponds to a CFTNET command.

Consequence

Transfer CFT is stopped during its initialization phase.

 

Error

CFTI22F: ID=&id Register request failure CS=&ncs NET=&net

Explanation

Cannot register a user, the identifier of which appears in the message. This user corresponds to a CFTPROT command.

Consequence

Transfer CFT is stopped during its initialization phase.

 

Error

CFTI23F: MAIN synchronization failure CR=&cr CS=&scs

Explanation

Internal synchronization error between the main Transfer CFT task and the protocol task.

Consequence

Transfer CFT is stopped during its initialization phase.

 

Information

CFTI24I : &str

Explanation

Message displayed when viewing the command cache or the transfer cache: CFTUTIL or CFTINT MQUERY command.

The messages depend on the type of cache concerned (command or catalog):

* TRANSFER CACHE IS EMPTY

The catalog cache is empty.

The messages vary according to the context:Or gives details of the cache information (catalog or command cache) according to the type of information displayed

For a line in the command cache, the information is divided into three parts:

  • command execution
  • DATE and TIME
  • type of command (SWITCH ACCNT, SWITCH LOG or PURGE)

For a transfer, the information is divided into four parts:

  • request activation time
  • identifier of the partner concerned
  • idf identifier and
  • IDT value calculated by Transfer CFT

 

Information  

CFTI25I Init complete _ Security active [&str]

Explanation

The description of the message &str specifies the activated security options:

  • HAB: Normal end of initialization with activation of the Transfer CFT security system
  • SSL: Normal end of initialization with activation of the SSL protocol

The information in this message is affected by the UCONF setting for access management.

 

Error

CFTI26I Init complete _ Security not active

Explanation

Normal end of initialization without activating the Security option ( Transfer CFT security system and the SSL protocol).

 

Error

CFTI27F Init Error code &scs _ Opening security file &file

Explanation

When Transfer CFT was initialized, a security system open error was detected.

Consequence

The Transfer CFT initialization phase is stopped.

Action

Inform Product Support.

 

Information  

CFTI28I Init complete _  

Explanation

Message on initialization of CFTMAIN. With following Message CFTI18I FNAME :catalog name.

 

Information  

CFTI34I PID=&id &task Task started successfully

Explanation

The &task Task whose internal identifier is &pid has been started successfully.

 

Information  

CFTI35I PID=&id &task Task ended

Explanation

The &task Task whose internal identifier is &pid has stopped.

 

Information  

CFTI36I CRONJOB: ID=%idcron, CRONTAB=%cronname %str  

Explanation

Idcron =ID de CFTCRON command

Cronname = id of the list in CRONTABS in CFTPARM

Str=

  • INSERT OK: NEXT= date time ,TIME= %s - (%s = TIME of CFTCRON command defined by ID)
  • INSERT OK: NOACTIVE- The CFTCRON with a STATE=NOACTIVE in the configuration is not activated.
  • Not enabled - (cronname not defined in the CRONTABS list)

 

Error  

CFTI38E CRONJOB: ID=%idcron, CRONTAB=%cronname INSERT FAILED

Explanation

 Insert failed due to incorrect entry or unexpected character. Check CRONTAB parameters, such as TIME.

 

Information  

CFTI39I

Explanation

Displays information about the Transfer CFT Heartbeat. Possible states:

  • Enable
  • Update UCONF parameters
  • Disable

 

Error  

CFTI40E OMVS SEGMENT NOT DEFINED for user=xxxxxx.

Explanation

z/OS only

If the OMVS segment is not defined for Transfer CFT and/or the Copilot server owner, then Transfer CFT, the Copilot server, or CFTUTIL (synchronous communication) stops and displays this message.

To disable the display and check option, modify the environment variable in the ..UPARM(CNFENV)target file as follows:

omvs_check_disable=1.

 

Information  

CFTI41I OMVS information for user=xxxxxx,uid=n,gid=n,home=(/xxxxx)

Explanation

z/OS only

If the OMVS segment is defined for Transfer CFT and/or the Copilot server owner, this information message displays.

To disable the display and check option, modify the environment variable in the ..UPARM(CNFENV)target file as follows:

omvs_check_disable=1.

 

Error  

CFTI42E PID=&pid &task Task startup error failed to lock resource '&pid_file_name': resource already locked

Explanation

The pid_file_name that is used to ensure process uniqueness could not be locked, causing the task to fail.

Locate and stop the locked process. If this does not resolve the issue, restart the server using the "force-stop" mode.

Related Links