type

ACT

[TYPE = PART | TRK | CRON ]

Type of object to be deactivated.

  • PART = Partner
  • TRK = Select to restart Sentinel notification
  • CRON = Enables the cronjob CRON=ID

INACT

[TYPE = PART | TRK | CRON ]

Type of object to be deactivated.

  • PART = Partner
  • TRK = Select to stop dynamic Sentinel notification. All further messages are lost.
  • CRON = Disables the cronjob CRON=ID

CFTCOM

TYPE = { FILE | MBX | TCPIP}

Type of Transfer CFT communication medium.

This parameter can take the following values:

  • FILE: communication is accomplished through a file
  • MBX: communication is accomplished through a mailbox
  • TCPIP: communication is performed through the synchronous communication medium

CFTNET

[TYPE = { TCP }] OS

Defines the type of network resource. This parameter can take the following values, according to the system:

  • TCP: TCP/IP network access resource

CFTIDF

TYPE = { RECV | SEND}

The transfer direction for which this correspondence is valid. Select either:

  • SEND: for send transfers
  • RECV: for receive transfers
 

CFTEXIT

[TYPE = {FILE | ACCESS | EXEC }] 

The type of exit program, as follows:

  • FILE (default value): Data is recorded in the monitor files
  • ACCESS: for a directory type EXIT
  • EXEC: for an end of transfer type EXIT

CFTACCNT

[TYPE = {FILE | SYST }] 

This defines the accounting type. CFTACCNT TYPE parameters are:

  • FILE (default value): Data is recorded in the Transfer CFT files defined in the fname and afname fields.
  • SYST: Data is recorded in the files of the operating system accounting utility. Available only on z/OS (MVS).

CFTPROT

[TYPE = {PeSIT | ODETTE | EBICS }]

Type of transfer protocol.

  • PeSIT: PeSIT protocol, version D or E.
  • EBICS: the EBICS banking exchange protocol

LISTPART

TYPE ={ALL | DEST | PART | TCP}

Type table

Value 

Meaning 

ALL 

Used to query the general and network characteristics of partners
Parameters of the PARTNER file

DEST 

Used to query the parameters configured in the CFTDEST command: concern the broadcasting lists 

PART 

Used to query the parameters configured in the CFTPART command: description of the general data relative to partners 

TCP

Used to query the parameters configured in the CFTTCP command: TCP/IP network parameters associated with each partner supporting TCP/IP 

CONFIG

TYPE = {CAT | COM | INPUT | OUTPUT | PARM | PART}

Defines the medium concerned.

Value 

Medium concerned 

CAT 

Catalog file 

COM 

Communication medium 

INPUT 

Command input file 

OUTPUT 

Report output file 

PARM 

Parameter file 

PART 

Partner file 

SWITCH

[TYPE = {LOG | ACCNT}]

Defines the switch action for CFTLOG or CFTACCNT. File types are:

  • LOG: The SWITCH command stops message writing on the current log file, switches to the alternate log file, and then executes the procedure specified in the EXEC parameter of the CFTLOG object.
  • ACCNT: The SWITCH command stops statistics from being written on the current statistical file, switches the writing to the alternate statistical file, and then executes the procedure specified in the EXEC parameter of the CFTACCNT object.

CFTEXT

[TYPE = { see Type table below }]

Defines the parameters to extract.

Type table

Value 

Meaning 

Command

ALL 

All the parameter types of the CFTPARM and CFTPART files 

 

ACCNT 

Description of the statistical files 

CFTACCNT 

AUTH 

List of authorized files 

CFTAUTH 

CAT 

Catalog definition 

CFTCAT 

COM 

Description of Transfer CFT communication methods  

CFTCOM 

IDF 

File "network" identifier 

CFTIDF 

LOG 

Log file description 

CFTLOG 

NET 

Network description 

CFTNET 

PARM 

General parameters 

CFTPARM 

PART 

Partner definition  

CFTPART and Transfer CFT network 

PROT 

Protocol definition 

CFTPROT 

RECV 

Description of the files to be received 

CFTRECV 

SEND 

Description of the files to be sent 

CFTSEND 

XLATE 

Translation table definition 

CFTXLATE 

TCP 

TCP/IP partner definition 

CFTTCP 

UCONF Unified configuration CFTEXT

LISTPARM

TYPE = {ACCNT | ALL | AUTH | CAT | COM | ETB | IDF | LOG | NET |PARM | PROT | RECV | SEND | XLATE}Defines the type of parameters to list from the Transfer CFT parameter file.

TYPE can take the predefined values indicated in the Type table below.

Type table

Value 

Definition 

ACCNT 

Used to query statistical file parameters
These parameters are submitted when CFTACCNT commands are entered 

ALL 

Used to query all the parameters indicated in the PARAMETER file 

AUTH 

Used to query file authorization lists
These lists are customized by the CFTAUTH commands 

CAT 

Used to query catalog parameters
These parameters are submitted when CFTCAT commands are entered 

COM 

Used to query communication media parameters
These parameters are submitted when CFTCOM commands are entered 

IDF 

Used to query file "network" identifiers
Identifiers are customized by the CFTIDF commands 

LOG 

Used to query log file parameters
These parameters are submitted when CFTLOG commands are entered 

NET 

Used to query network characteristic parameters
These parameters are submitted when CFTNET commands are entered and differ according to the type of network configured 

PARM 

Used to query general parameters
These parameters are submitted when CFTPARM commands are entered 

PROT 

Used to query protocol parameters
These parameters are submitted when CFTPROT commands are entered and differ according to the protocol configured 

RECV 

Used to query the parameters of the files to be received
These parameters are submitted when CFTRECV commands are entered 

SEND 

Used to query the parameters of the files to be sent
These parameters are submitted when CFTSEND commands are entered 

XLATE 

Used to query translation tables
Translation tables are customized by the CFTXLATE object

CFTFILE

Used to create, empty, or delete Transfer CFT files

LISTCAT

Used to query the information associated with the selected transfers, recorded in the Transfer CFT catalog

DISPLAY

Used to query the information as with the LISTCAT command. It uses an external XML file that lists and describes customized models. These models are used to format the output

ABOUT

Used to display the Transfer CFT computer characteristics

RECONFIG

TYPE = { CRON | UCONF | CAT }

  • CRON: Reloads the CRON table.
  • UCONF:Updates the configuration.
  • CAT: Modifies the catalog.

Return to Command index

Related Links