#### In requester mode

[MINTIME = { 00000000 | time}]

Transfer initial validity time, from the first day (MINDATE).

The value ‘time’ may be expressed:

• Explicitly (absolute time)
• In SEND or RECV commands, relative to the time the command is taken into account

In this case, the corresponding absolute time must be less than 24 hours. The indicated value is expressed in minutes.

Example

MINTIME = +30 means that the transfer initial validity time is the time the command is taken into account plus 30 minutes. This acceptance time must be less than 23 h 30.

MINTIME must not be equal to MAXTIME unless MAXDATE is defined and is not the current date.