Transfer CFT 3.6 Users Guide Save PDF Selected topic Selected topic and subtopics All content Transfer CFT communication systems This topic presents basic information about the hardware devices and the software for each of the communications systems. Direct contact with the distributor ensures that you have an exhaustive and accurate list of devices than can be used with Transfer CFT Windows. Transfer CFT Windows uses the TCP/IP network as its communications system. Transfer CFT provides two options: EICON option CAPI option EICON option This option was validated with the EICON card resident on the same machine on which Transfer CFT Windows executes. On Windows, EICON products used for validation were: C21 card or a S51 card EICON WAN services for Windows (V3R4) Eicon WAN Adapters Refer to the operations to perform prior to your first start-up with an EICON card, in Running CFT for the first time. CAPI option This option works with all types of cards. It has been validated with a CAPI interface card resident on the same machine on which Transfer CFT Windows is executed, under all operating systems. The products used for validation are: DIVA card from EICON, or GAZEL card Corresponding CAPI driver Refer to the operations to perform prior to your first start-up with ISDN-CAPI cards, in Running CFT for the first time. TCP/IP network Transfer CFT can be based on the TCP/IP layer supplied as standard by Windows. When it operates in TCP/IP, Transfer CFT can use any type of link that can be implemented via the WINSOCK interface. Refer to the operations to perform prior to your first start-up in TCP/IP, in Running CFT for the first time. Related Links
Transfer CFT communication systems This topic presents basic information about the hardware devices and the software for each of the communications systems. Direct contact with the distributor ensures that you have an exhaustive and accurate list of devices than can be used with Transfer CFT Windows. Transfer CFT Windows uses the TCP/IP network as its communications system. Transfer CFT provides two options: EICON option CAPI option EICON option This option was validated with the EICON card resident on the same machine on which Transfer CFT Windows executes. On Windows, EICON products used for validation were: C21 card or a S51 card EICON WAN services for Windows (V3R4) Eicon WAN Adapters Refer to the operations to perform prior to your first start-up with an EICON card, in Running CFT for the first time. CAPI option This option works with all types of cards. It has been validated with a CAPI interface card resident on the same machine on which Transfer CFT Windows is executed, under all operating systems. The products used for validation are: DIVA card from EICON, or GAZEL card Corresponding CAPI driver Refer to the operations to perform prior to your first start-up with ISDN-CAPI cards, in Running CFT for the first time. TCP/IP network Transfer CFT can be based on the TCP/IP layer supplied as standard by Windows. When it operates in TCP/IP, Transfer CFT can use any type of link that can be implemented via the WINSOCK interface. Refer to the operations to perform prior to your first start-up in TCP/IP, in Running CFT for the first time.