Transfer CFT messages: CFTW

This topic lists the CFTWxx and CFTXxx messages and provides the type, a description, consequence, and corrective actions when applicable.

Message format

Earlier versions of Transfer CFT used a different message format than version 3.1.3 and higher. The error messages displayed in this document use the former, or earlier version, format. If your system uses the CFTLOG parameter Format = V24, the log display is as shown below:

CFTXXX: fixed text message <variables>

Example

CFTLOG FORMAT=[V23,V24]

For V23: CFTT57I PART=&part IDF=&idf IDT=&idt &str transfer started

For V24: CFTT57I &str transfer started <IDTU=&idtu PART=&part IDF=&idf IDT=&idt>

 

V23 format

V24 format

Warning

CFTW01W PART=&part IDF=&idf IDT=&idt Temporary file &file deleted

CFTW01W File &fname deleted <IDTU=&idtu PART=&part IDF=&idf IDT=&idt >

Explanation

The &file temporary file was deleted at the end of the transfer. The name of this file is declared in the WFNAME parameter of the CFTSEND and CFTRECV commands.

 

V23 format

V24 format

Warning

CFTW02W CFTSEND &idsend override SEND parameters

CFTW02W CFTSEND &id override SEND parameters

Explanation

The parameters of the SEND command are overridden by the parameters in the associated CFTSEND command.

 

V23 format

V24 format

Warning

CFTW03W _ Send command: Unauthorized usage of IDF = &idf

CFTW03W _ Send Command : Unauthorized usage on IDF = &id

Explanation

The &idf IDF is not authorized for the SEND command. Check your software key restrictions.

 

V23 format

V24 format

Warning

CFTW04W _ Recv command: Unauthorized usage on IDF = &idf

CFTW04W _ Recv Command : Unauthorized usage on IDF = &id

Explanation

The &idf IDF is not authorized for the RECV command. See the restrictions concerning the value of your software key.

 

V23 format

V24 format

Warning

CFTW05W PART=&part IDF = &idf Temporary file unknown, WFNAME not defined in SEND

CFTW05W PART=&part IDF=&idf Temporary file unknown, WFNAME not defined in SEND

Explanation

The WFNAME was not set in the CFTSEND command when preparing a transfer requiring additional processing and sending a group of files.

Action

Modify the parameter settings using a different IDF for this type of transfer.

 

V23 format

V24 format

Warning

CFTW07W PART=&part IDF = &idf _ SELFNAME not authorized for COPY

CFTW07W PART=&par IDF=&idf _ SELFNAME not authorized for COPY\n

Explanation

You cannot use a selection file when implementing additional processing prior to a transfer (IEBCOPY with MVS for example).

Consequence

The transfer is not triggered.

Action

Do not use a selection file; you can, however, specify a generic file name (FNAME= #FIL1*, FNAME= #TFILM*).

 

V23 format

V24 format

Warning

CFTW08W CFTRECV &idrecv override RECV parameters

CFTW08W CFTRECV &id override RECV parameters

Explanation

The RECV command parameters are overridden by the parameters set in the associated CFTRECV command.

 

V23 format

V24 format

Warning

CFTW09I PART=&part IDF=&idf1 &str IDT=&idt CFTSEND &idf2 NIDF=&nidf

CFTW09I PART=&part IDF=&idf1 &str IDT=&idt CFTRECV &idf2 NIDF=&nidf

CFTW09I CFTSEND &idf1 &str<IDTU=&idtu PART=&part IDF=&idf2 IDT=&idt NIDF=&nidf

CFTW09I CFTRECV &idf1 &str <IDTU=&idtu PART=&part IDF=&idf2 IDT=&idt NIDF=&nidf

Explanation

Indicates the ID that was used.

  • &idf1 indicates the CFTSEND or CFTRECV ID to use
  • &idf2 indicates the SEND or RECV ID (in requester mode), or CFTSEND or CFTRECV ID (in server mode) provided to Transfer CFT
  • If &idf1 differs from &idf2, then &str = "default" indicates that Transfer CFT is using the default template

Example 1

The IDF is not defined in a CFTSEND command, for example: SEND PART=SERVER,IDF=UNKN but no CFTSEND ID=UNKN

Defined: CFTW09I CFTSEND BIN default <IDTU=A0000024 PART=SERVER IDF=UNKN IDT=I0714504 NIDF=TRTR >

Example 2

IDF is defined in a CFTSEND command, for example: SEND PART=SERVER,IDF=TRTR and CFTSEND ID=TRTR

Defined: CFTW09I CFTSEND TRTR <IDTU=A0000024 PART=SERVER IDF=TRTR IDT=I0714504 NIDF=TRTR >

Related Links