Transfer CFT 3.6 Users Guide Save PDF Selected topic Selected topic and subtopics All content type ABOUT [ TYPE = { ALL | HOST | CFT } ] Displays the Transfer CFT product, host, and key information. ACT [TYPE = PART | TRK | CRON | FOLDER ] Type of object to be deactivated. PART = Partner TRK = Select to restart Sentinel notification CRON = Enables the cronjob CRON=ID INACT [TYPE = PART | TRK | CRON | FOLDER ] Type of object to be deactivated. PART = Partner TRK = Select to stop dynamic Sentinel notification. All further messages are lost. CRON = Disables the cronjob CRON=ID CFTCOM TYPE = { FILE | TCPIP} Type of Transfer CFT communication medium. This parameter can take the following values: FILE: communication is accomplished through a file TCPIP: communication is performed through the synchronous communication medium CFTNET [TYPE = { TCP } ] Defines the type of network resource. This parameter can take the following values, according to the system: TCP: TCP/IP network access resource CFTIDF TYPE = { RECV | SEND} The transfer direction for which this correspondence is valid. Select either: SEND: for send transfers RECV: for receive transfer CFTEXIT [TYPE = {FILE | ACCESS | EXEC }] The type of exit program, as follows: FILE (default value): Data is recorded in the monitor files ACCESS: for a directory type EXIT EXEC: for an end of transfer type EXIT CFTACCNT [TYPE = {FILE | SYST }] This defines the accounting type. CFTACCNT TYPE parameters are: FILE (default value): Data is recorded in the Transfer CFT files defined in the fname and afname fields. SYST: Data is recorded in the files of the operating system accounting utility. Available only on z/OS (MVS). CFTPROT [TYPE = {PeSIT | ODETTE }] Type of transfer protocol. PeSIT: PeSIT protocol, version D or E. ODETTE: OFTP (ODETTE) protocol LISTPART TYPE ={ALL | DEST | PART | TCP} Type table Value Meaning ALL Used to query the general and network characteristics of partnersParameters of the PARTNER file DEST Used to query the parameters configured in the CFTDEST command: concern the broadcasting lists PART Used to query the parameters configured in the CFTPART command: description of the general data relative to partners TCP Used to query the parameters configured in the CFTTCP command: TCP/IP network parameters associated with each partner supporting TCP/IP CONFIG TYPE = {CAT | COM | INPUT | OUTPUT | PARM | PART} Defines the medium concerned. Value Medium concerned CAT Catalog file COM Communication medium INPUT Command input file OUTPUT Report output file PARM Parameter file PART Partner file SWITCH [TYPE = {LOG | ACCNT}] Defines the switch action for CFTLOG or CFTACCNT. File types are: LOG: The SWITCH command stops message writing on the current log file, switches to the alternate log file, and then executes the procedure specified in the EXEC parameter of the CFTLOG object. ACCNT: The SWITCH command stops statistics from being written on the current statistical file, switches the writing to the alternate statistical file, and then executes the procedure specified in the EXEC parameter of the CFTACCNT object. CFTEXT [TYPE = {see Type table below }] Defines the parameters to extract. Type table Value Meaning Command ALL All the parameter types of the CFTPARM and CFTPART files ACCNT Description of the statistical files CFTACCNT AUTH List of authorized files CFTAUTH CAT Catalog definition CFTCAT COM Description of Transfer CFT communication methods CFTCOM IDF File "network" identifier CFTIDF LOG Log file description CFTLOG NET Network description CFTNET PARM General parameters CFTPARM PART Partner definition CFTPART and Transfer CFT network PROT Protocol definition CFTPROT RECV Description of the files to be received CFTRECV SEND Description of the files to be sent CFTSEND XLATE Translation table definition CFTXLATE TCP TCP/IP partner definition CFTTCP UCONF Unified configuration CFTEXT LISTPARM TYPE = {ACCNT | ALL | AUTH | CAT | COM | ETB | IDF | LOG | NET |PARM | PROT | RECV | SEND | XLATE } Defines the type of parameters to list from the Transfer CFT parameter file. TYPE can take the predefined values indicated in the Type table below. Type table Value Definition ACCNT Used to query statistical file parametersThese parameters are submitted when CFTACCNT commands are entered ALL Used to query all the parameters indicated in the PARAMETER file AUTH Used to query file authorization listsThese lists are customized by the CFTAUTH commands CAT Used to query catalog parametersThese parameters are submitted when CFTCAT commands are entered COM Used to query communication media parametersThese parameters are submitted when CFTCOM commands are entered IDF Used to query file "network" identifiersIdentifiers are customized by the CFTIDF commands LOG Used to query log file parametersThese parameters are submitted when CFTLOG commands are entered NET Used to query network characteristic parametersThese parameters are submitted when CFTNET commands are entered and differ according to the type of network configured PARM Used to query general parametersThese parameters are submitted when CFTPARM commands are entered PROT Used to query protocol parametersThese parameters are submitted when CFTPROT commands are entered and differ according to the protocol configured RECV Used to query the parameters of the files to be receivedThese parameters are submitted when CFTRECV commands are entered SEND Used to query the parameters of the files to be sentThese parameters are submitted when CFTSEND commands are entered XLATE Used to query translation tablesTranslation tables are customized by the CFTXLATE object CFTFILE Used to create, empty, or delete Transfer CFT files LISTCAT Used to query the information associated with the selected transfers, recorded in the Transfer CFT catalog DISPLAY Used to query the information as with the LISTCAT command. It uses an external XML file that lists and describes customized models. These models are used to format the output ABOUT Used to display the Transfer CFT computer characteristics RECONFIG TYPE = { CRON | UCONF | CAT | FOLDER | PARMCACHE | AM } CAT: resize the catalog while the Transfer CFT is running (hot catalog resizing) CRON: reload the CFTCRON objects FOLDER: reload the CFTFOLDER objects UCONF: reload the dynamic UCONF parameters PARMCACHE: clear the parameter cache AM: reload Return to Command index Related Links
type ABOUT [ TYPE = { ALL | HOST | CFT } ] Displays the Transfer CFT product, host, and key information. ACT [TYPE = PART | TRK | CRON | FOLDER ] Type of object to be deactivated. PART = Partner TRK = Select to restart Sentinel notification CRON = Enables the cronjob CRON=ID INACT [TYPE = PART | TRK | CRON | FOLDER ] Type of object to be deactivated. PART = Partner TRK = Select to stop dynamic Sentinel notification. All further messages are lost. CRON = Disables the cronjob CRON=ID CFTCOM TYPE = { FILE | TCPIP} Type of Transfer CFT communication medium. This parameter can take the following values: FILE: communication is accomplished through a file TCPIP: communication is performed through the synchronous communication medium CFTNET [TYPE = { TCP } ] Defines the type of network resource. This parameter can take the following values, according to the system: TCP: TCP/IP network access resource CFTIDF TYPE = { RECV | SEND} The transfer direction for which this correspondence is valid. Select either: SEND: for send transfers RECV: for receive transfer CFTEXIT [TYPE = {FILE | ACCESS | EXEC }] The type of exit program, as follows: FILE (default value): Data is recorded in the monitor files ACCESS: for a directory type EXIT EXEC: for an end of transfer type EXIT CFTACCNT [TYPE = {FILE | SYST }] This defines the accounting type. CFTACCNT TYPE parameters are: FILE (default value): Data is recorded in the Transfer CFT files defined in the fname and afname fields. SYST: Data is recorded in the files of the operating system accounting utility. Available only on z/OS (MVS). CFTPROT [TYPE = {PeSIT | ODETTE }] Type of transfer protocol. PeSIT: PeSIT protocol, version D or E. ODETTE: OFTP (ODETTE) protocol LISTPART TYPE ={ALL | DEST | PART | TCP} Type table Value Meaning ALL Used to query the general and network characteristics of partnersParameters of the PARTNER file DEST Used to query the parameters configured in the CFTDEST command: concern the broadcasting lists PART Used to query the parameters configured in the CFTPART command: description of the general data relative to partners TCP Used to query the parameters configured in the CFTTCP command: TCP/IP network parameters associated with each partner supporting TCP/IP CONFIG TYPE = {CAT | COM | INPUT | OUTPUT | PARM | PART} Defines the medium concerned. Value Medium concerned CAT Catalog file COM Communication medium INPUT Command input file OUTPUT Report output file PARM Parameter file PART Partner file SWITCH [TYPE = {LOG | ACCNT}] Defines the switch action for CFTLOG or CFTACCNT. File types are: LOG: The SWITCH command stops message writing on the current log file, switches to the alternate log file, and then executes the procedure specified in the EXEC parameter of the CFTLOG object. ACCNT: The SWITCH command stops statistics from being written on the current statistical file, switches the writing to the alternate statistical file, and then executes the procedure specified in the EXEC parameter of the CFTACCNT object. CFTEXT [TYPE = {see Type table below }] Defines the parameters to extract. Type table Value Meaning Command ALL All the parameter types of the CFTPARM and CFTPART files ACCNT Description of the statistical files CFTACCNT AUTH List of authorized files CFTAUTH CAT Catalog definition CFTCAT COM Description of Transfer CFT communication methods CFTCOM IDF File "network" identifier CFTIDF LOG Log file description CFTLOG NET Network description CFTNET PARM General parameters CFTPARM PART Partner definition CFTPART and Transfer CFT network PROT Protocol definition CFTPROT RECV Description of the files to be received CFTRECV SEND Description of the files to be sent CFTSEND XLATE Translation table definition CFTXLATE TCP TCP/IP partner definition CFTTCP UCONF Unified configuration CFTEXT LISTPARM TYPE = {ACCNT | ALL | AUTH | CAT | COM | ETB | IDF | LOG | NET |PARM | PROT | RECV | SEND | XLATE } Defines the type of parameters to list from the Transfer CFT parameter file. TYPE can take the predefined values indicated in the Type table below. Type table Value Definition ACCNT Used to query statistical file parametersThese parameters are submitted when CFTACCNT commands are entered ALL Used to query all the parameters indicated in the PARAMETER file AUTH Used to query file authorization listsThese lists are customized by the CFTAUTH commands CAT Used to query catalog parametersThese parameters are submitted when CFTCAT commands are entered COM Used to query communication media parametersThese parameters are submitted when CFTCOM commands are entered IDF Used to query file "network" identifiersIdentifiers are customized by the CFTIDF commands LOG Used to query log file parametersThese parameters are submitted when CFTLOG commands are entered NET Used to query network characteristic parametersThese parameters are submitted when CFTNET commands are entered and differ according to the type of network configured PARM Used to query general parametersThese parameters are submitted when CFTPARM commands are entered PROT Used to query protocol parametersThese parameters are submitted when CFTPROT commands are entered and differ according to the protocol configured RECV Used to query the parameters of the files to be receivedThese parameters are submitted when CFTRECV commands are entered SEND Used to query the parameters of the files to be sentThese parameters are submitted when CFTSEND commands are entered XLATE Used to query translation tablesTranslation tables are customized by the CFTXLATE object CFTFILE Used to create, empty, or delete Transfer CFT files LISTCAT Used to query the information associated with the selected transfers, recorded in the Transfer CFT catalog DISPLAY Used to query the information as with the LISTCAT command. It uses an external XML file that lists and describes customized models. These models are used to format the output ABOUT Used to display the Transfer CFT computer characteristics RECONFIG TYPE = { CRON | UCONF | CAT | FOLDER | PARMCACHE | AM } CAT: resize the catalog while the Transfer CFT is running (hot catalog resizing) CRON: reload the CFTCRON objects FOLDER: reload the CFTFOLDER objects UCONF: reload the dynamic UCONF parameters PARMCACHE: clear the parameter cache AM: reload Return to Command index